Wood and Resin

It is the fastest RTV silicone rubber on the market, it hardens in just 6 hours at room temperature.

It has a very high resistance to tearing and is ideal for making soft molds (13 ShoreA hardness).

It is the fastest RTV silicone rubber on the market, it hardens in just 6 hours at room temperature.

It has a very high resistance to tearing and is ideal for making soft molds (20 ShoreA hardness).

It is a silicone rubber in paste, certified for contact with the skin, which allows you to make perfect molds in 5 minutes. 

It can be used on vertical surfaces and faithfully copies even the smallest details.

• Completely non-toxic
• Hand moldable rubber
• Fast and easy to use

It is the silicone rubber for condensation that resists high temperatures.

It is ideal for making molds for metal soldiers or for making coatings to protect electrical or electronic mechanical components.

Quick silicone rubber.

It hardens in just 30 min. at room temperature. It has a very high dimensional stability (linear shrinkage 0%).

Ideal for RAPID PROTOTYPING (hardness 35 shoreA)

Addition silicone rubber. 

It hardens in 3 hours at room temperature, has a very high dimensional stability (linear shrinkage 0%) and high technical and mechanical performance (+ 15% of casting compared to other tires).

Ideal for making soft professional molds (hardness 12 shoreA) in a simple and safe way.

Addition silicone rubber. 

It hardens in 3 hours at room temperature, has a very high dimensional stability (linear shrinkage 0%) and high technical and mechanical performance (+ 15% of casting compared to other tires).

Ideal for making medium hardness professional molds (hardness 21 shoreA) in a simple and safe way.

Addition silicone rubber. 

It hardens in 3 hours at room temperature, has a very high dimensional stability (linear shrinkage 0%) and high technical and mechanical performance (+ 15% of casting compared to other tires).

Ideal for making hard professional molds (hardness 30 shoreA) in a simple and safe way.

Addition of silicone rubber.

It has a very high dimensional stability (linear contraction 0%) and high technical and mechanical performance (+ 20% of the jet compared to other tires).

Ideal for making TRANSPARENT / TRANSLUCENT professional dies for the jewelry sector with hardness 33 shoreA.

Addition of silicone rubber.

It has a very high dimensional stability (linear contraction 0%) and high technical and mechanical performance (+ 20% of the jet compared to other tires).

Ideal for making TRANSPARENT / TRANSLUCENT professional dies for the jewelry sector with hardness 45 shoreA.

It is the most used condensation paste silicone rubber in Pietrasanta by sculptors and model makers. 

It allows making large and light molds directly on vertical surfaces.

Fast epoxy resin, easy and safe to use, it allows you to create transparent and shiny objects in resin in just 4 hours.

INNOVATIVE FORMULA: the creations can be turned out of the silicone molds after only 4 hours and harden completely after 6 hours; The workability time is 10'-15 'for quantities up to 30gr.

EASY TO USE: mix the 2 components with the 2: 1 catalysis ratio (30g product A + 15g product B) to have the product ready for use. Easy to color with specific dyes for epoxy resins.

EXCELLENT MECHANICAL PROPERTIES: its viscosity allows the casting without incorporating air bubbles, allowing excellent workability both on surfaces and with silicone molds.

RECOMMENDED: for making jewels, trinkets, modeling, artistic creations, bijoux, cabochons, works by Mixed Media and coverings on different supports such as wood.

Transparent epoxy resin to make shiny and transparent objects.

EASY TO USE: mix the 2 components with the right ratio of catalysis (60% = 100g component A + 60g component B) to have the product ready for use; Easy to color with specific dyes for epoxy resins.

THE MOST USED: for making jewels, trinkets, models, artistic creations and coatings on different supports such as wood, flooring, concrete and much more.

EXCELLENT RESISTANCE TO EXTERNAL AGENTS: The special UV filter prevents yellowing caused by ultraviolet rays from the sun; The crystalline transparency allows to obtain a glazing effect even with thicknesses of 3 cm.

EXCELLENT MECHANICAL PROPERTIES: its viscosity allows the casting without incorporating air bubbles, allowing excellent workability both on surfaces and with silicone molds.

QUALITY RESCHIMICA: Italian company at the forefront for the production of rubbers, resins and foams.

White Resin for perfect creations in 20 minutes.

It fastly creates white colored objects, easy to be colored, detailed and without air bubbles. 

Perfect for resin creations, decorations, bijoux and DIY project.

Grey resin for perfect models in 20 min. without air bubbles.

Cold ceramics to be diluted in water.

Fil Ceramic is the Marmorina powder for silicone molds. It is white marble and simple to use.

Ideal for the production of chalks and ceramics.

Intense and bright color, perfect for Fil Bianco and Fil Cristal resins (covering effect)

Available in packages of  50ml and in 5 different colors: red, blue, yellow, white and black.

Buying a 5 color kit you save the 20%

Bright and transparent color ideal for Fil Cristal resin.

Enriched with a special UV filter that improves light resistance.

Available in packs of 50ml in 5 different colors: red, blue, dark yellow, white and black.

Buying the 5 color kit you save 20%

Bright and transparent color ideal for Fil Cristal, Cristal E and UV Resins.

Enriched with a special UV filter that improves light resistance.

Protect your work surface with this comfortable silicone mat!

Washable

UV torch with 12 LEDs, powered by 3 AAA batteries (not included).

Mix the components of the resin or rubber with confidence in this comfortable silicone doser!

Washable and reusable 

No more wrong dosages!

Its physical characteristics are: chemical inertia, good dielectric properties, low surface tension.

Thixotropic additive. Catalysis percentage 3%.