• FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)

    Transparent epoxy resin to make shiny and transparent objects.

    EASY TO USE: mix the 2 components with the right ratio of catalysis (60% = 100g component A + 60g component B) to have the product ready for use; Easy to color with specific dyes for epoxy resins.

    THE MOST USED: for making jewels, trinkets, models, artistic creations and coatings on different supports such as wood, flooring, concrete and much more.

    EXCELLENT RESISTANCE TO EXTERNAL AGENTS: The special UV filter prevents yellowing caused by ultraviolet rays from the sun; The crystalline transparency allows to obtain a glazing effect even with thicknesses of 3 cm.

    EXCELLENT MECHANICAL PROPERTIES: its viscosity allows the casting without incorporating air bubbles, allowing excellent workability both on surfaces and with silicone molds.

    QUALITY RESCHIMICA: Italian company at the forefront for the production of rubbers, resins and foams.


    14 voti
    Starting from €16.00
  • CRISTAL E - Fast transparent resin for casting up to a max thickness of 1 cm (catalyzes in 4h)

    Fast epoxy resin, easy and safe to use, it allows you to create transparent and shiny objects in resin in just 4 hours.

    INNOVATIVE FORMULA: the creations can be turned out of the silicone molds after only 4 hours and harden completely after 6 hours; The workability time is 10'-15 'for quantities up to 30gr.

    EASY TO USE: mix the 2 components with the 2: 1 catalysis ratio (30g product A + 15g product B) to have the product ready for use. Easy to color with specific dyes for epoxy resins.

    EXCELLENT MECHANICAL PROPERTIES: its viscosity allows the casting without incorporating air bubbles, allowing excellent workability both on surfaces and with silicone molds.

    RECOMMENDED: for making jewels, trinkets, modeling, artistic creations, bijoux, cabochons, works by Mixed Media and coverings on different supports such as wood.


    11 voti
    Starting from €19.00
  • CRISTAL P - Epoxy resin for casting up to 30 cm (catalyses in 72/96h)

    Professional transparent epoxy resin for making tables and design objects.

    The product hardens in 72/96 hours, does not turn yellow (special UV filter), self-level and can be used for application in thickness (up to 20 cm / m2).


    0 voti
    Starting from €33.00
  • SHINY - Polishing Gel Coat to restore or give shine to your opaque creations

    SHINY - GEL COAT

    Turn your creations into a few minutes, making them super shiny with just one gesture!

     


    6 voti
    Starting from €4.00
  • RESIN ART COLOR - Intense and brilliant colors for resin in 5 colors of 50ml (covering effect)

    Intense and bright color, perfect for Fil Bianco and Fil Cristal resins (covering effect)

    Available in packages of  50ml and in 5 different colors: red, blue, yellow, white and black.

    Buying a 5 color kit you save the 20%


    3 voti
    Starting from €25.00
  • FIL CRISTAL COLOR SPECIAL - Special transparent and brilliant colors for resin (glass effect)

    Bright and transparent color ideal for Fil Cristal, Cristal E and UV Resins.

    Enriched with a special UV filter that improves light resistance.


    2 voti
    Starting from €20.00
  • FIL CRISTAL COLOR - Transparent and brilliant colors for resin (glass effect)

    Bright and transparent color ideal for Fil Cristal resin.

    Enriched with a special UV filter that improves light resistance.

    Available in packs of 50ml in 5 different colors: red, blue, dark yellow, white and black.

    Buying the 5 color kit you save 20%


    2 voti
    Starting from €25.00
  • SILICONE OIL - Release agent and lubricant also used in the fluid painting technique

    Its physical characteristics are: chemical inertia, good dielectric properties, low surface tension.


    1 voti
    Starting from €8.00
  • FIL CERAMIC - Cold ceramic marmorina powder to be diluted in water (workability 5-7min)

    Cold ceramics to be diluted in water.

    Fil Ceramic is the Marmorina powder for silicone molds. It is white marble and simple to use.

    Ideal for the production of chalks and ceramics.


    3 voti
    Starting from €6.50
  • FIL BIANCO - Fast polyurethane resin white color (catalyzes in 20 min)

    White Resin for perfect creations in 20 minutes.

    It fastly creates white colored objects, easy to be colored, detailed and without air bubbles. 

    Perfect for resin creations, decorations, bijoux and DIY project.


    10 voti
    Starting from €10.00
  • SILICONE MAT - Ideal tool to protect the work surface (washable and reusable)

    Protect your work surface with this comfortable silicone mat!

    Washable


    3 voti
    Starting from €6.00
  • SIL ART - Silicone Rubber in paste ideal for large molds and vertical applications

    It is the most used condensation paste silicone rubber in Pietrasanta by sculptors and model makers. 

    It allows making large and light molds directly on vertical surfaces.


    1 voti
    Starting from €26.50
  • SIL HAND - Silicone rubber in paste certified for skin contact (hardens in 5 minutes)

    It is a silicone rubber in paste, certified for contact with the skin, which allows you to make perfect molds in 5 minutes. 

    It can be used on vertical surfaces and faithfully copies even the smallest details.

    • Completely non-toxic
    • Hand moldable rubber
    • Fast and easy to use

    6 voti
    Starting from €15.00
  • R 15 - Silicone rubber for soft molds (catalyzes in 6 hours)

    It is the fastest RTV silicone rubber on the market, it hardens in just 6 hours at room temperature.

    It has a very high resistance to tearing and is ideal for making soft molds (13 ShoreA hardness).


    5 voti
    Starting from €21.00
  • R 20 - Silicone rubber for molds of medium hardness (catalyzes in 6 hours)

    It is the fastest RTV silicone rubber on the market, it hardens in just 6 hours at room temperature.

    It has a very high resistance to tearing and is ideal for making soft molds (20 ShoreA hardness).


    2 voti
    Starting from €21.00
  • THIXOTROPIC - To make the rubber spatulable vertically (3% catalysis)

    Thixotropic additive. Catalysis percentage 3%.

    Perfect to paddle the rubber on a vertical surface without making it pour


    0 voti
    Starting from €8.00
  • R PRO FAST - Additive silicone rubber that catalyzes in 30 minutes

    Quick silicone rubber.

    It hardens in just 30 min. at room temperature. It has a very high dimensional stability (linear shrinkage 0%).

    Ideal for RAPID PROTOTYPING (hardness 35 shoreA)


    1 voti
    Starting from €29.00
  • R PRO 10 - Additive Silicone Rubber for professional soft molds (catalyzes in 3h)

    Addition silicone rubber. 

    It hardens in 3 hours at room temperature, has a very high dimensional stability (linear shrinkage 0%) and high technical and mechanical performance (+ 15% of casting compared to other tires).

    Ideal for making soft professional molds (hardness 12 shoreA) in a simple and safe way.


    3 voti
    Starting from €25.00
  • R PRO 20 - Additive Silicone rubber for professional medium hardness molds (catalyzes in 3h)

    Addition silicone rubber. It hardens in 3 hours at room temperature, has a very high dimensional stability (linear shrinkage 0%) and high technical and mechanical performance (+ 15% of casting compared to other tires).

    Ideal for making medium hardness professional molds (hardness 21 shoreA) in a simple and safe way.


    1 voti
    Starting from €25.00
  • R PRO 30 - Additive Silicone rubber for professional high hardness molds (catalyzes in 3h)

    Addition silicone rubber. It hardens in 3 hours at room temperature, has a very high dimensional stability (linear shrinkage 0%) and high technical and mechanical performance (+ 15% of casting compared to other tires).

    Ideal for making hard professional molds (hardness 30 shoreA) in a simple and safe way.


    7 voti
    Starting from €25.00
  • R PRO TECH 33 - Additive Silicone Rubber ideal for the professional jewellery sector (33 shoreA)

    Addition of silicone rubber.

    It has a very high dimensional stability (linear contraction 0%) and high technical and mechanical performance (+ 20% of the jet compared to other tires).

    Ideal for making TRANSPARENT / TRANSLUCENT professional dies for the jewelry sector with hardness 33 shoreA.


    0 voti
    Starting from €29.00
  • R PRO TECH 45 - Additive Silicone Rubber ideal for the professional jewellery sector (45 shoreA)

    Addition of silicone rubber. It has a very high dimensional stability (linear contraction 0%) and high technical and mechanical performance (+ 20% of the jet compared to other tires). Ideal for making TRANSPARENT / TRANSLUCENT professional dies for the jewelry sector with hardness 45 shoreA.


    1 voti
    Starting from €29.00
  • R METAL - Silicone Rubber high temperature resistant

    It is the silicone rubber for condensation that resists high temperatures.

    It is ideal for making molds for metal soldiers or for making coatings to protect electrical or electronic mechanical components.


    3 voti
    Starting from €22.00
  • FIL CRISTAL UV - Monocomponent transparent resin (catalyzes in 2 minutes with UV rays)

    It hardens in a few minutes with UV rays.



    ULTRA TRANSPARENT: the resin is in liquid form; Quickly solidifies in 1-6 minutes if exposed to light from a UV source while maintaining its crystalline effect.

    EASY TO USE: fill the mold or make the sculpture by hand and expose everything to UV light, there is nothing else to do!

    EASY TO COLOR: color the resin to your liking through a wide selection of specific colorants for resins such as our Resin Color, Fil Cristal Color and Resin Art.

    IDEAL FOR DIY: create jewelry, trinkets, pendants, earrings, artistic decorations and much more, the limit is only your imagination!


    7 voti
    Starting from €9.00
  • FIL CRISTAL UV SOFT - Transparent resin monocomponent more liquid (hardens in 2 min with UV rays)

    More liquid than Fil Cristal UV, Fil Cristal UV Soft hardens in a few minutes with UV rays.



    ULTRA TRANSPARENT: the resin is in liquid form; Quickly solidifies in 1-6 minutes if exposed to light from a UV source while maintaining its crystalline effect.

    EASY TO USE: fill the mold or make the sculpture by hand and expose everything to UV light, there is nothing else to do!

    EASY TO COLOR: color the resin to your liking through a wide selection of specific colorants for resins such as our Resin Color, Fil Cristal Color and Resin Art.

    IDEAL FOR DIY: create jewelry, trinkets, pendants, earrings, artistic decorations and much more, the limit is only your imagination!


    0 voti
    Starting from €9.00
  • UV TORCH - Ideal tool for UV resin creations (catalyses the UV resin in 10sec)

    UV torch with 12 LEDs, powered by 3 AAA batteries (not included).


    1 voti
    Starting from €6.00
  • FIL GRIGIO - Gray polyurethane resin for model making (catalyzes in 20min)

    Gray Resin for perfect models in 20 minutes.

    It fastly creates white colored objects, easy to be colored, detailed and without air bubbles. Perfect for scale model and miniatures.


    7 voti
    Starting from €18.00
  • SILICONE DISPENSER - Ultimate Silicone Cup with meter

    Super size transparent silicone dispenser - 250ml - with integrated meter on the sides to always be precise.

    Easy to clean can be used indefinitely!


    1 voti
    Starting from €5.00
  • SILCONE DISPENSER - Ultimate precision pouring Silicon Cup

    Ultimate precision translucent silicone dispenser essential for finishing with maximum precision for your creations, dosing the last drops of colored resin in the perfect point where it is needed.


    Easy to clean, it can be used practically indefinitely.


    0 voti
    Starting from €3.00