Pigment flakes (5gr)

Size : 10-70μm

You can add the powdered pigments to the epoxy resin compound (base and catalyst), mixing well for a few minutes. The pigments will dissolve perfectly, without forming lumps .

You can brush them on the bottom of the silicone molds to bring out all the details of the surface to the maximum, once the creation is unmolded. In this case, create a base by previously mixing the resin with a dark color of Resin Art Color or Fil Cristal Color or using a polyurethane resin such as Fil Bianco and Fil Grigio .

If you use them with Fil Cristal uv resin, add a little pigment, otherwise the uv rays will not penetrate properly and the resin will have catalysis problems.

Always wear gloves and a mask when using these volatile powders.