Glitter Laser 5gr

Laser Glitter

You can add the Laser Glitters to the epoxy resin compound (base and catalyst), mixing well for a few minutes. The Glitter will melt perfectly, without forming lumps.

You can brush them on the bottom of the silicone moulds to bring out all the details of the surface as much as possible, once the creation has been taken out of the mould. In this case, create a base by previously mixing the resin with a dark color of the Resin Art Color or the Fil Cristal Color or using a polyurethane resin such as Fil Bianco  and Fil Grigio.

If you use them with the Fil Cristal uv resin, add little pigment, otherwise the uv rays will not penetrate properly and the resin will have catalysis problems.

Always wear gloves and a mask when using these volatile powders.

DISCOVER THE 3 COLORS AVAILABLE