×

SHOPPING FROM

  • -20%
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin...
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)
82 voti

FIL CRISTAL - Transparent resin crystal effect for casting up to a max thickness of 3 cm (catalyzes in 12/24h)

Reschimica
CODE: fil-cristal

FOR PROFESSIONAL USE

Transparent epoxy resin to make shiny and transparent objects.

EASY TO USE: mix the 2 components with the right ratio of catalysis (60% = 100g component A + 60g component B) to have the product ready for use; Easy to color with specific dyes for epoxy resins.

THE MOST USED: for making jewels, trinkets, models, artistic creations and coatings on different supports such as wood, flooring, concrete and much more.

EXCELLENT RESISTANCE TO EXTERNAL AGENTS: The special UV filter prevents yellowing caused by ultraviolet rays from the sun; The crystalline transparency allows to obtain a glazing effect even with thicknesses of 3 cm.

EXCELLENT MECHANICAL PROPERTIES: its viscosity allows the casting without incorporating air bubbles, allowing excellent workability both on surfaces and with silicone molds.

QUALITY RESCHIMICA: Italian company at the forefront for the production of rubbers, resins and foams.

Packaging
Quantity
-
1
+
65-25B0-PTFL
List
€24.00
VAT included
Your price list -20%
€19.20
VAT included

Are you looking for larger formats? Visit the large quantities section or
Warning cart
Safety information
+ -

In accordance with Regulation No. 1272/2008, the product is classified as hazardous

Section A

Hazard statements:

  • Aquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects.
  • Eye Irrit. 2: H319 - Causes serious eye irritation.
  • Skin Irrit. 2: H315 - Causes skin irritation.
  • Skin Sens. 1: H317 - May cause an allergic skin reaction.

Precautionary statements:

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/protective clothing/eye protection.
  • P391: Collect spillage.
  • P501: Dispose of contents/ container in accordance with local/regional/national/international regulation.

Section B

Hazard statements:

  • Acute Tox. 4: H302 - Harmful if swallowed.
  • Aquatic Chronic 3: H412 - Harmful to aquatic life with long lasting effects.
  • Skin Corr. 1B: H314 - Causes severe skin burns and eye damage.
  • Skin Sens. 1A: H317 - May cause an allergic skin reaction.

Precautionary statements:

  • P260: Do not breathe dust/fume/gas/mist/vapours/spray.
  • P264: Wash hands thoroughly after handling
  • P280: Wear protective gloves/protective clothing.
  • P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P310: Immediately call a poison center/doctor.
Truck cart
Delivery in 48 hours
+ -
Fast delivery within 48 hours from the order
Ship cart
FREE shipping over € 40
+ -
Free shipping if your order exceeds 40 €
Payment methods Payment methods
Support and phone orders
Do you need a quote for large quantities?
Ask for quote
Contact our offices
from Mon to Fri 08-13 // 14-18
 
  • CATALYSIS SCALE: 60% 

ex: 100G OF COMP. A + 60G DI COMP. B

Perfect for artworks, Bijoux, creations and resin decorations and to reproduce water effects 

The product hardens in 12/24 hours, it is self-levelling and may be used for application in thickness (up to 3 cm).

 

To be used in the presence o fan adult. 

Catalyzing time
1 h:1:0
Maximum casting
3 cm
Application
Bricolage
Coasters
Incorporations
Lamps
Wood
security_info
inquinanteacqua
pericolo
sostanzechimiche
29 Items
637913813801

We also recommend you

Customers who bought this item also bought

Product added to compare.