×

SHOPPING FROM

41 voti

R15 - Condensation casting liquid silicone rubber, soft and fast moulds

Reschimica
In stock, ready to ship
CODE: r-15

RUBBER FOR PROFESSIONAL USE

R15 is a liquid mold rubber with high resistance to tearing by condensation. Suitable for modeling and moldmaking, this silicone rubber is very versatile and ideal for making soft molds that allow you to reproduce even the smallest details and undercuts.

 ✔️ RAPID CURING: It is the fastest condensation silicone rubber on the market, it hardens in just 6 hours at room temperature and the working time is 30 minutes at room temperature.

✔️EXCELLENT MECHANICAL PROPERTIES: Very high resistance to lacerations and aging; Compared to other silicone rubbers for casting on the market, it is possible to obtain 15% more castings.

✔️ EASY TO USE: Thanks to its low viscosity and high elasticity, it allows you to faithfully copy even the smallest details, to create molds of all types and sizes and is particularly suitable for making objects and creations in plaster, resin, wax, soap and cement .

✔️GIVE YOUR CREATIVITY FREEDOM: make molds for candles, jewelry, costume jewelry, statues, casts, modeling, 3d prints and much more.

Silicone per stampi morbidi shore a 12
Shore
A 13
Silicone per stampi morbidi mix ratio
Mix Ratio
100:5
Silicone per stampi morbidi veloce
Fast Curing
Time 6 hours
Silicone per stampi morbidi riproduce dettagli
Reproduce
every Detail
 
Packaging
Quantity
-
1
+
AY-2BB5-6CRV
List
€21.90
VAT included
Your price list -10%
€19.71
VAT included
Lowest price within 30 days before promotion. €17.95
Time left

Are you looking for larger formats? Visit the large quantities section or
Warning cart
Safety information
+ -

In accordance with Regulation nº1272/2008 (CLP), the product is classified as hazardous

Section B

Hazard statements:

  • Acute Tox. 4: H332 - Harmful if inhaled.
  • Eye Irrit. 2: H319 - Causes serious eye irritation.
  • Flam. Liq. 3: H226 - Flammable liquid and vapor.
  • Flam. Sol. 1: H228 - Flammable solid.
  • Skin Sens . 1A:H317 - May cause an allergic skin reaction.
  • TOT SE 3: H335 - May irritate respiratory tract.

Cautionary advice:

  • P210 Keep away from heat, hot surfaces, sparks, open flames or other sources of ignition - No smoking P280 Wear gloves / protective clothing / eye protection.
  • P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): immediately take off all contaminated clothing. Rinse the skin or take a shower.
  • P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
  • P403 + P233 Keep container tightly closed and in a well-ventilated place.
  • P501 Dispose of contents / container in accordance with local / regional / national / international regulation.
Truck cart
Delivery in 48 hours
+ -
Fast delivery within 48 hours from the order
Ship cart
FREE shipping over € 40
+ -
Free shipping if your order exceeds 40 €
Payment methods Payment methods
Support and phone orders
Do you need a quote for large quantities?
Ask for quote
Contact our offices
from Mon to Fri 08-13 // 14-18
 

It is a bi-component silicone rubber for soft molds (base + catalyst) that thanks to its low viscosity and high elasticity allows copying faithfully even the smallest details. Ideal to make molds of any type and size and is particularly suitable for making objects and creations in plaster, resins, wax, soap, and cement.

Thanks to the special catalyst formula we managed to:

  • Reduce the setting (from 12 hours to 6 hours)
  • Eliminate the bad smells typical of the other catalyseurs.
  • Improve technical and mechanical performance (+ 15% of casting compared to all other commercially available condensation silicone rubbers)
  • Improve the aging resistance of the molds
Catalyzing time
6 h
Application
Jewels
Modeling
Restoration
Wax and candles
Temperature resistance
up to 120 degrees
Hardness
13 shore
security_info
infiammabile
pericolo
623 Items
8056420410099

We also recommend you

Customers who bought this item also bought