×

SHOPPING FROM

  • -15%

R20 - Liquid silicone for medium hard...
R20 - Liquid silicone for medium hard...
R20 - Liquid silicone for medium hard...
R20 - Liquid silicone for medium hard...
R20 - Liquid silicone for medium hard molds
R20 - Liquid silicone for medium hard molds
R20 - Liquid silicone for medium hard molds
R20 - Liquid silicone for medium hard molds
20 voti

R20 - Liquid silicone for medium hard molds

Reschimica
In stock, ready to ship
CODE: r-20

FOR PROFESSIONAL USE

It is the fastest RTV silicone rubber on the market, it hardens in just 6 hours at room temperature. It has a very high resistance to tearing and is ideal for molds making  (20 ShoreA hardness).

Silicone per stampi di media durezza shore a 20
Shore
A 20
Silicone per stampi di media durezza mix ratio
Mix Ratio
100:5
Silicone per stampi di media durezza veloce
Fast Curing
Time 6 hours
Silicone per stampi di media durezza riproduce dettagli
Reproduce
every Detail
 
Packaging
Quantity
-
1
+
ZS-QGB9-0TKI
List
€21.90
VAT included
Your price list -15%
€18.61
VAT included
Time left

Are you looking for larger formats? Visit the large quantities section or
Warning cart
Safety information
+ -

In accordance with Regulation No. 1272/2008, the product is classified as hazardous.

Section B


Hazard statements:

  • Acute Tox. 4: H332 - Harmful if inhaled.
  • Eye Irrit. 2: H319 - Causes serious eye irritation.
  • Flam. Liq. 3: H226 - Flammable liquid and vapor.
  • Flam. Sol. 1: H228 - Flammable solid.
  • Skin Sens . 1A: H317 - May cause an allergic skin reaction
  • TOT SE 3: H335 - May irritate respiratory tract
  • P210 Keep away from heat, hot surfaces, sparks, open flames or other sources of ignition - No smoking
  • P280 Wear gloves / protective clothing / eye protection.
  • P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): immediately take off all contaminated clothing. Rinse the skin or take a shower.
  • P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
  • P403 + P233 Keep container tightly closed and in a well-ventilated place. P501 Dispose of contents / container in accordance with local / regional / national / international regulation.
Truck cart
Delivery in 48 hours
+ -
Fast delivery within 48 hours from the order
Ship cart
FREE shipping over € 40
+ -
Free shipping if your order exceeds 40 €
Payment methods Payment methods
Support and phone orders
Do you need a quote for large quantities?
Ask for quote
Contact our offices
from Mon to Fri 08-13 // 14-18
 

It is a bi-component rubber (base + catalyst) that thanks to its low viscosity and high elasticity allows copying faithfully even the smallest details. Ideal to make molds of any type and size and is particularly suitable for making objects and creations in plaster, resins, wax, soap, and cement. Thanks to the special catalyst formula we managed to:

  • Reduce the setting (from 12 hours to 6 hours)
  • Eliminate the bad smells typical of the other catalyseurs.
  • Improve technical and mechanical performance (+ 15% of casting compared to all other commercially available condensation silicone rubbers)
  • Improve the aging resistance of the molds
Catalyzing time
6 h
Application
Jewels
Modeling
Restoration
Wax and candles
Temperature resistance
up to 120 degrees
Hardness
20 shore
security_info
infiammabile
pericolo
6 Items
634438276005

We also recommend you

Customers who bought this item also bought

Product added to compare.