-10%

R-WAX RELEASE - Separator with Wax for Epoxy Resin, Polyester Resin, PMMA and Polyurethane

4 voti

R-WAX RELEASE - Separator with Wax for Epoxy Resin, Polyester Resin, PMMA and Polyurethane

Name: R-WAX RELEASE - Separator with Wax for Epoxy Resin, Polyester Resin, PMMA and Polyurethane
Brand: Reschimica
SKU: APDIST01
Price: 17.01 EUR
Availability: InStock

Brand: Reschimica

In stock, ready to ship

CODE: APDIST01

FOR PROFESSIONAL USE

✔️DESCRIPTION: The release agent creates a layer of wax on the surfaces of the mould/models, with a strong non-stick action.

✔️HOW TO USE: Apply the product inside the mold or matrix with a brush or spray gun. Inside it is possible to pour the resin, both epoxy and polyurethane and the acrylic ones.

✔️ADVICE ON USE: It is recommended in the preparation of molds and formworks in which to pour the resin.

✔️RESISTANT: Withstands high temperatures (up to +180°C).

✔️MULTIPURPOSE: It can also be applied to materials such as wood, metal, plastic and even cardboard, making the perfectly non-stick surface in which to pour the resin or other compounds in just a few minutes.

Read more +

Quantity

Reference APDIST01

List

€18.90

VAT included

Your price list -10%

€17.01

VAT included

Are you looking for larger formats? Visit the large quantities section or

Safety information

+ -

In accordance with Regulation nº1272/2008 (CLP), the product is classified as hazardous

Section A

Hazard statements:

Aerosol 1: H222 - Extremely flammable aerosol.
Aerosol 1: H229 - Pressurised container: May burst if heated.
Aquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects.
Skin Irrit. 2: H315 - Causes skin irritation.
STOT SE 3: H336 - May cause drowsiness or dizziness.

Precautionary statements:

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection.
P302+P352: IF ON SKIN: Wash with plenty of water.
P312: Call a POISON CENTER/doctor if you feel unwell.
P362+P364: Take off contaminated clothing and wash it before reuse.
P391: Collect spillage. P403: Store in a well-ventilated place.
P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
P501: Dispose of contents/ container in accordance with local/regional/national/international regulation.

Download the safety data sheet

Delivery in 48h

+ -

Fast delivery within 48 hours from the order

FREE shipping over € 40

+ -

Free shipping if your order exceeds 40 €

Support and phone orders

Do you need a quote for large quantities?
Ask for quote

Contact our offices

from Mon to Fri 08-13 // 14-18

+39 055 807 1454

info@reschimica.com

The release agent creates a layer of wax on the surfaces of the mold, with strong non-stick action.

Applications: Apply the product inside the mold or matrix with a brush or spray gun. Inside it is possible to pour the resin, both epoxy and polyurethane, and acrylic.

Withstands high temperatures (up to + 180 ° C).

How to use: It is recommended in the preparation of molds in which to pour the resin. It can also be applied to materials such as wood, metal, plastic and even cardboard, making the surface perfectly non-stick when pouring the resin or other compounds.

Warning: the use of tools that increase the temperature such as lighters, heat guns, etc. is not recommended.