• -30%
R-WAX RELEASE - Release agent spray
1 voti

R-WAX RELEASE - Release agent spray



R-Wax Release (400ml) is for Epoxy, Polyurethane, and Acrylic Resins.
A wax-based product for application with brush or spray for molds and models in which to pour resin.

VAT included
Your price list -30%
VAT included

Are you looking for larger formats? Visit the large quantities section or
Warning cart
Safety information
+ -

In accordance with Regulation nº1272/2008 (CLP), the product is classified as hazardous

Section A

Hazard statements:

  • Aerosol 1: H222 - Extremely flammable aerosol.
  • Aerosol 1: H229 - Pressurised container: May burst if heated.
  • Aquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects.
  • Skin Irrit. 2: H315 - Causes skin irritation.
  • STOT SE 3: H336 - May cause drowsiness or dizziness.

Precautionary statements:

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
  • P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection.
  • P302+P352: IF ON SKIN: Wash with plenty of water.
  • P312: Call a POISON CENTER/doctor if you feel unwell.
  • P362+P364: Take off contaminated clothing and wash it before reuse.
  • P391: Collect spillage. P403: Store in a well-ventilated place.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
  • P501: Dispose of contents/ container in accordance with local/regional/national/international regulation.
Truck cart
Delivery in 48 hours
+ -
Fast delivery within 48 hours from the order
Ship cart
FREE shipping over € 40
+ -
Free shipping if your order exceeds 40 €
Payment methods Payment methods
Support and phone orders
Do you need a quote for large quantities?
Ask for quote
Contact our offices
from Mon to Fri 08-13 // 14-18

The release agent creates a layer of wax on the surfaces of the mold, with strong non-stick action.

Applications: Apply the product inside the mold or matrix with a brush or spray gun. Inside it is possible to pour the resin, both epoxy and polyurethane, and acrylic.

Withstands high temperatures (up to + 180 ° C).

How to use: It is recommended in the preparation of molds in which to pour the resin. It can also be applied to materials such as wood, metal, plastic and even cardboard, making the surface perfectly non-stick when pouring the resin or other compounds.

Warning: the use of tools that increase the temperature such as lighters, heat guns, etc. is not recommended.

93 Items
Product added to compare.