CRISTAL E - Fast transparent resin for casting up to a max thickness of 1 cm (catalyzes in 4h)

Fast epoxy resin, easy and safe to use, it allows you to create transparent and shiny objects in resin in just 4 hours.



INNOVATIVE FORMULA: the creations can be turned out of the silicone molds after only 4 hours and harden completely after 6 hours; The workability time is 10'-15 'for quantities up to 30gr.

EASY TO USE: mix the 2 components with the 2: 1 catalysis ratio (30g product A + 15g product B) to have the product ready for use. Easy to color with specific dyes for epoxy resins.

EXCELLENT MECHANICAL PROPERTIES: its viscosity allows the casting without incorporating air bubbles, allowing excellent workability both on surfaces and with silicone molds.

RECOMMENDED: for making jewels, trinkets, modeling, artistic creations, bijoux, cabochons, works by Mixed Media and coverings on different supports such as wood.

€19.00
€19.00
Packaging

 

Politiche per la sicurezza (modificale con il modulo Rassicurazioni cliente)

 

Politiche per le spedizioni (modificale con il Modulo rassicurazioni cliente)

 

Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)


Product for Professional Use

Fast Shipping in 48/72 hours

Guaranteed Returns and Refunds

CRISTAL E is a fast epoxy resin (catalyzes in just 4 hours!) And simple to use.

It'll allow you to create objects in transparent and shiny resin in just 4 hours and has a very simple catalysis ratio: 2: 1 (for example 20gr of part A + 10gr of part B)

 

Ideal for making bijoux, cabochons, jewels and works by Mixed Media.

Cristal E is a professional product that allows the creation of transparent, brilliant works, typical of epoxy resin, halving the processing time. Thanks to its innovative formula the creations have been transformed from the models after only 4 hours and harden completely after 6 hours.

 

The working time is 10'-15 'for quantities up to 30gr.

To get the best result, work for 60-90 seconds and apply.

Prepare 100 grams of product at a time to prevent the resin from pre-catalyzing before exercise.

Technical note: catalysis times (hardening of the creations) are influenced by external factors, such as temperature and humidity. The higher the temperature, the faster the catalysis. 

Furthermore, the product can be removed from the silicone molds after 4 hours, but its maximum safety (not deformable) will occur after 12 / 24h.

 

As with all other epoxy resins, the use of tempera and acrylic enamels in percentages higher than 1% can damage the mechanical strength of the creations.

You might also like