R7 - Silicone for very soft moulds, break-resistant and elastic

6 voti

R7 - Silicone for very soft moulds, break-resistant and elastic

Name: R7 - Silicone for very soft moulds, break-resistant and elastic
Brand: Reschimica
SKU: R7
Price: 20.8 EUR
Availability: InStock

Brand: Reschimica

In stock, ready to ship

CODE: R7

RUBBER FOR PROFESSIONAL USE

R7 is a liquid mold rubber with high resistance to tearing by condensation. Suitable for modeling and moldmaking, this silicone rubber is very versatile and ideal for making soft molds that allow you to reproduce even the smallest details and undercuts.

✔️RAPID CURING: It is the fastest condensation silicone rubber on the market, it hardens in just 6 hours at room temperature and the working time is 30 minutes at room temperature.

✔️EXCELLENT MECHANICAL PROPERTIES: Very high resistance to lacerations and aging; Compared to other silicone rubbers for casting on the market, it is possible to obtain 15% more castings.

✔️ EASY TO USE: Thanks to its low viscosity and high elasticity, it allows you to faithfully copy even the smallest details, to create molds of all types and sizes and is particularly suitable for making objects and creations in plaster, resin, wax, soap and cement .

✔️GIVE YOUR CREATIVITY FREEDOM: make molds for candles, jewelry, costume jewelry, statues, casts, modeling, 3d prints and much more.

Shore
A 7

Mix Ratio
100:5

Fast Curing
Time 6 hours

Reproduce
every Detail

Read more +

Packaging

Quantity

Reference IR70

List

€21.90

VAT included

Your price list -5%

€20.80

VAT included

Lowest price within 30 days before promotion. €20.46

Time left

Are you looking for larger formats? Visit the large quantities section or

Safety information

+ -

In accordance with Regulation nº1272/2008 (CLP), the product is classified as hazardous

Section B

Hazard statements:

Acute Tox. 4: H332 - Harmful if inhaled.
Eye Irrit. 2: H319 - Causes serious eye irritation.
Flam. Liq. 3: H226 - Flammable liquid and vapor.
Flam. Sol. 1: H228 - Flammable solid.
Skin Sens . 1A:H317 - May cause an allergic skin reaction.
TOT SE 3: H335 - May irritate respiratory tract.

Cautionary advice:

P210 Keep away from heat, hot surfaces, sparks, open flames or other sources of ignition - No smoking P280 Wear gloves / protective clothing / eye protection.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): immediately take off all contaminated clothing. Rinse the skin or take a shower.
P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
P403 + P233 Keep container tightly closed and in a well-ventilated place.
P501 Dispose of contents / container in accordance with local / regional / national / international regulation.

Delivery in 48h

+ -

Fast delivery within 48 hours from the order

FREE shipping over € 40

+ -

Free shipping if your order exceeds 40 €

Support and phone orders

Do you need a quote for large quantities?
Ask for quote

Contact our offices

from Mon to Fri 08-13 // 14-18

+39 055 807 1454

info@reschimica.com

It is a bi-component silicone rubber for soft molds (base + catalyst) that thanks to its low viscosity and high elasticity allows copying faithfully even the smallest details. Ideal to make molds of any type and size and is particularly suitable for making objects and creations in plaster, resins, wax, soap, and cement.

Thanks to the special catalyst formula we managed to:

Reduce the setting (from 12 hours to 6 hours)
Eliminate the bad smells typical of the other catalyseurs.
Improve technical and mechanical performance (+ 15% of casting compared to all other commercially available condensation silicone rubbers)
Improve the aging resistance of the molds